Asus P7H55 series User Manual Download Page 48

Page: 48 / 66

2-10

ASUS P7H55

2.3.4

Storage Configuration

The

Storage Configuration

menu allows you to configure your storage device(s). Select an

item then press

<Enter>

to display the sub-menu.

SATA Configuration [Enhanced]

Configuration options: [Disabled] [Compatible] [Enhanced]

Configure SATA as [IDE]

Sets the configuration for the Serial ATA connectors supported by the Southbridge chip.

Configuration options: [IDE] [AHCI]

• If you want to use the Serial ATA hard disk drives as Parallel ATA physical storage

devices, keep the default setting [IDE].

• If you want the Serial ATA hard disk drives to use the Advanced Host Controller Interface

(AHCI), set this item to [AHCI]. The AHCI allows the onboard storage driver to enable

advanced Serial ATA features that increases storage performance on random workloads

by allowing the drive to internally optimize the order of commands.

Hard Disk Write Protect [Disabled]

Disables or enables device write protection. This will be effective only if the device is

accessed through BIOS. Configuration option: [Disabled] [Enabled]

IDE Detect Time Out (Sec) [35]

Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10]

[15] [20] [25] [30] [35]

2.3.5

System Information

This menu gives you an overview of the general system specifications. The BIOS

automatically detects the items in this menu.

BIOS Information

Displays the auto-detected BIOS information

Processor

Displays the auto-detected CPU specification

System Memory

Displays the auto-detected system memory

Summary of Contents for P7H55 series



































































Search results

Summary of Contents for P7H55 series

Reviews:

Related manuals for P7H55 series

Brands by name

Popular brands

Asus P7H55 series, User Manual

Search results

Summary of Contents for P7H55 series

Reviews:

Related manuals for P7H55 series

Brands by name

Popular brands