ASUS P7H55-M LX/USB3
2-13
2.4.2
Chipset
The
Chipset
menu allows you to change the advanced chipset settings. Select an item then
press
<Enter>
to display the submenu.
Uncore configuration
DRAM Frequency [Auto]
Allows you to adjust the DRAM frequency.
Configuration options: [Auto] [DDR3-1066 MHz] [DDR3-1333 MHz]
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI memory above
the total physical memory. Enable this option only when you install 64-bit operating
system. Configuration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PCIE/PCI]
Allows you to decide which graphics controller to use as the primary boot device. The
configuration options for this item vary with CPUs. When a Lynnfield CPU is installed,
the default setting is [PCIE/PCI]. The configuration options are [PCI/PCIE] [PCIE/PCI].
When a Clarkdale CPU is installed, the default setting is [PEG/PCI]. The configuration
options are [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI].
2.4.3
Onboard Devices Configuration
HDA Controller [Enabled]
Allows you to enable or disable the high definition audio controller.
Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Allows you to select the front panel type. If High Definition Audio Front Panel used,
please set HD Audio mode. Configuration options: [AC97] [HD Audio]
Onboard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller.
Configuration options: [Enabled] [Disabled]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN controller. This item
appears only when the
Onboard LAN
item is set to
[Enabled]. Configuration options:
[Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
