Asus P5VDC-TVM SE Page 21 User Manual Download

Page: 21 / 70

ASUS P5VDC-TVM SE

1-9

The CPU fits in only one correct orientation. DO NOT force the CPU into the

socket to prevent bending the connectors on the socket and damaging the CPU!

6. Close the load plate (A), then push

the load lever (B) until it snaps into

the retention tab.

Notes on Intel

Hyper-Threading Technology

• This motherboard supports Intel

Pentium

4 CPUs in the 775-land

package with Hyper-Threading Technology.

• Hyper-Threading Technology is supported under Windows

XP/2003

Server and Linux 1.7.x (kernel) and later versions only. Under Linux, use

the Hyper-Threading compiler to compile the code. If you are using any

other operating systems, disable the Hyper-Threading Technology item in

the BIOS to ensure system stability and performance.

• Installing Windows

XP Service Pack 1 or later version is recommended.

• Make sure to enable the Hyper-Threading Technology item in BIOS before

installing a supported operating system.

• For more information on Hyper-Threading Technology, visit www.intel.

com/info/hyperthreading.

To use the Hyper-Threading Technology on this motherboard:
1. Install an Intel

Pentium

4 CPU in the 775-land package that supports

Hyper-Threading Technology.

2. Power up the system and enter the BIOS Setup (see Chapter 2: BIOS

setup). Under the Advanced Menu, make sure that the item Hyper-Threading

Technology is set to Enabled. The item appears only if you installed a CPU

that supports Hyper-Threading Technology.

3. Reboot the computer.

Summary of Contents for P5VDC-TVM SE







































































Search results

Summary of Contents for P5VDC-TVM SE

Reviews:

Related manuals for P5VDC-TVM SE

Brands by name

Popular brands

Asus P5VDC-TVM SE, User Manual

Search results

Summary of Contents for P5VDC-TVM SE

Reviews:

Related manuals for P5VDC-TVM SE

Brands by name

Popular brands