Asus P5Q Premium - Motherboard - ATX User Manual Download Page 120

Page: 120 / 196

4-2

Chapter 4: Software support

4.2.2

Drivers menu

The Drivers menu shows the available device drivers if the system detects installed

devices. Install the necessary drivers to activate the devices.

ASUS InstAll - Drivers Installation Wizard

Installs all of the drivers through the Installation Wizard.

Intel Chipset Inf Update Program

Installs the Intel

chipset Inf update program.

SoundMAX ADI Audio Driver

Installs the SoundMAX

AD2000B audio driver and application.

Marvell Yukon Gigabit Ethernet Driver

Installs the Marvell

Yukon Gigabit Ethernet driver.

Infineon TPM Professional Driver

Installs the Infineon

TPM Professional driver.

Marvell 61xx SATA Driver

Installs the Marvell

61xx SATA driver.

ASUS EPU-6 Engine

Installs the ASUS EPU-6 Engine driver and utility.

Summary of Contents for P5Q Premium - Motherboard - ATX





































































































































































































Search results

Summary of Contents for P5Q Premium - Motherboard - ATX

Reviews:

Asus P5Q Premium - Motherboard - ATX, User Manual, Page: 120 / 196

Search results

Summary of Contents for P5Q Premium - Motherboard - ATX

Reviews: