Asus P5Q Premium - Motherboard - ATX User Manual Download Page 105

Page: 105 / 196

ASUS P5Q Premium

3-33

Power On By PS/2 Keyboard [Disabled]

Allows you to disable the Power On by PS/2 keyboard function or set specific keys

on the PS/2 keyboard to turn on the system. This feature requires an ATX power

supply that provides at least 1A on the +5VSB lead.

Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]

Energy Star 4.0c Support [Disabled]

Setting this item to [Enabled] to pass Energy Star 4.0c rating. When enabled,

S3-PS/2 & USB wake-up functions will be closed, and S4/S5-Marvell LAN, PS/2 &

USB devices wake-up functions will be closed.

Configuration options: [Enabled] [Disabled]

3.6.6

Hardware Monitor

CPU Temperature [xxxºC/xxxºF]

MB Temperature [xxxºC/xxxºF]

The onboard hardware monitor automatically detects and displays the motherboard

and CPU temperatures. Select [Ignored] if you do not wish to display the detected

temperatures.

CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A]

The onboard hardware monitor automatically detects and displays the CPU

fan speed in rotations per minute (RPM). If the fan is not connected to the

motherboard, the field shows [N/A].

CPU Q-Fan Control [Disabled]

Allows you to enable or disable the CPU Q-fan control feature.

Configuration options: [Disabled] [Enabled]

The following item appears only when you enable the

CPU Q-Fan Control

item.

Select Screen

Select Item

Change Field

F1 General Help

F10 Save and Exit

ESC Exit

Hardware Monitor

CPU Temperature

[47ºC/116.5ºF]

MB Temperature

[43ºC/109ºF]

CPU Fan Speed

[3013RPM]

CPU Q-Fan Control

[Disabled]

Chassis Fan 1 Speed

[N/A]

Chassis Fan 2 Speed

[N/A]

Chassis Fan 3 Speed

[N/A]

Chassis Q-Fan Control

[Disabled]

Power Fan Speed

[N/A]

CPU Voltage

[ 1.264V]

3.3V Voltage

[ 3.280V]

5V Voltage

[ 5.064V]

12V Voltage

[12.040V]

CPU Temperature

BIOS SETUP UTILITY

Power

Summary of Contents for P5Q Premium - Motherboard - ATX





































































































































































































Search results

Summary of Contents for P5Q Premium - Motherboard - ATX

Reviews:

Asus P5Q Premium - Motherboard - ATX, User Manual, Page: 105 / 196

Search results

Summary of Contents for P5Q Premium - Motherboard - ATX

Reviews: