2-20
Chapter 2: BIOS information
2.7.1
Boot Device Priority
1st ~ xxth Boot Device
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system. Configuration options: [Removable Dev] [Hard Drive]
[ATAPI CD-ROM] [Disabled]
2.7
Boot menu
The
Boot
menu items allow you to change the system boot options. Select an item then
press
<Enter>
to display the sub-menu.
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
Specifies the Boot
Device Priority
sequence.
A virtual drive (Drive
B:) may appear when you
set the CD-ROM drive as
the first boot device.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power
Boot
Tools Exit
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage [xxxV] or [Ignored]
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators.
Chassis Q-Fan Control [Enabled]
Allows you to enable or disable the Chassis Q-Fan control. Configuration options: [Disabled]
[Enabled]
Chassis Fan Profile [Optimal]
This item appears only when you enable the
Chassis Q-Fan Control
feature and allows
you to set the appropriate performance level of the chassis fan. When set to [Optimal], the
chassis fan automatically adjusts depending on the chassis temperature. Sets this item to
[Silent Mode] to minimize the fan speed for quiet chassis fan operation, or [Performance
Mode] to achieve maximum chassis fan speed. Configuration options: [Optimal] [Silent Mode]
[Performance Mode]
2.6.6
Anti Surge Support [Enabled]
Allows you to enable or disable the Anti-Surge protection feature. Configuration options:
[Disabled] [Enabled]
• To select the boot device during system startup, press <F8> when ASUS Logo appears.
• To access Windows
®
OS in Safe Mode, do any of the following:
•
Press <F5> when ASUS Logo appears.
•
Press <F8> after POST.
