Asus P5N73-CM Manual Download Page 41

Page: 41 / 64

ASUS P5N73-CM

2-1

Chapter.2

BIOS.information

2.1.

Managing.and.updating.your.BIOS

The following utilities allow you to manage and update the motherboard Basic Input/Output

System (BIOS) setup.

1..

ASUS.Update:

Updates the BIOS in Windows

environment.

2..

ASUS.EZ.Flash.2:

Updates the BIOS in DOS mode using a floppy disk or a USB flash

disk.

3..

ASUS.AFUDOS:

Updates the BIOS in DOS mode using a bootable floppy disk.

ASUS.CrashFree.BIOS.2

: Updates the BIOS using a bootable floppy disk, or the

motherboard support DVD when the BIOS file fails or gets corrupted.

Refer to the corresponding sections for details on these utilities.

Save a copy of the original motherboard BIOS file to a bootable floppy disk or a USB flash

disk in case you need to restore the BIOS in the future. Copy the original motherboard

BIOS using the ASUS Update or AFUDOS utilities.

2.1.1.

ASUS.Update.utility

The ASUS Update is a utility that allows you to manage, save, and update the motherboard

BIOS in Windows

environment. The ASUS Update utility allows you to:

•

Save the current BIOS file

•

Download the latest BIOS file from the Internet

•

Update the BIOS from an updated BIOS file

•

Update the BIOS directly from the Internet, and

•

View the BIOS version information.

This utility is available in the support DVD that comes with the motherboard package.

ASUS Update requires an Internet connection either through a network or an Internet

Service Provider (ISP).

Installing.ASUS.Update

To install ASUS Update:
1.

Place the support DVD in the optical drive. The

Drivers

menu appears.

Click the

Utilities

tab, then click

Install.ASUS.Update

The ASUS Update utility is copied to your system.

Quit all Windows

applications before you update the BIOS using this utility.

Summary of Contents for P5N73-CM

































































Search results

Summary of Contents for P5N73-CM

Reviews:

Related manuals for P5N73-CM

Brands by name

Popular brands

Asus P5N73-CM, Manual

Search results

Summary of Contents for P5N73-CM

Reviews:

Related manuals for P5N73-CM

Brands by name

Popular brands