Asus P5N32-SLI Premium User Manual Download Page 111

Page: 111 / 114

ASUS PN-SLI Premium

• We suggest that you update only the BIOS file coming from the same

memory/CPU configuration and BIOS version.

• Only the “xxx.CMO” file can be loaded.

4.7.2

ASUS O.C. Profile

This item allows you to store or load multiple BIOS settings.

Select Menu

Item Specific Help

Press

[Enter] to

select.

ASUS O.C. Profile

Load BIOS Profile

Save BIOS Profile

Phoenix-Award BIOS CMOS Setup Utility

Tools

Load BIOS Profile

Load from Profile 1/2

Allows you to load the previous BIOS settings saved in the BIOS Flash. Press

<Enter> to load the file.

Load from File

Allows you to load the previous BIOS file saved in the hard disk/floppy disk/USB

flash disk with the FAT32/16/12 format. Follow the instructions below to load the

BIOS file.

1.  Insert the storage devices that contains the “xxx.CMO” file.
2.  Turn on the system.
3.  Enter BIOS setup program. Go to the “Tools” menu to select “Load from

File.” Press <Enter> then the setup screen will appear.

4. Press <Tab> to switch between drives before the correct “xxx.CMO” file

is found. Then press <Enter> to load the file.

5. A pop-up message will inform you when the loading process finishes.

Select Menu

Item Specific Help

Load BIOS Profile from

Profile 1.

Load BIOS Profile

Load from Profile 1

Load from Profile 2

Load from File

Phoenix-Award BIOS CMOS Setup Utility

Tools

Summary of Contents for P5N32-SLI Premium



















































































































Search results

Summary of Contents for P5N32-SLI Premium

Reviews:

Related manuals for P5N32-SLI Premium

Brands by name

Popular brands

Asus P5N32-SLI Premium, User Manual

Search results

Summary of Contents for P5N32-SLI Premium

Reviews:

Related manuals for P5N32-SLI Premium

Brands by name

Popular brands