2-8
Chapter 2: BIOS information
Vanderpool Technology [Enabled]
Enables or disables this item when the processor supports Vanderpool technology. Users
need to reset the computer to change the configuration of this item. Configuration options:
[Enabled] [Disabled]
CPU TM function [Enabled]
Enables or disables Intel
®
CPU Thermal Monitor (TM) function, a CPU overheating protection
function. When enabled, the CPU core frequency and voltage are reduced when the CPU
overheats. Configuration options: [Disabled] [Enabled]
Execute Disable Bit [Enabled]
Allows you to enable or disable the No-Execution Page Protection Technology. Setting this
item to
[Disabled]
forces the XD feature flag to always return to zero (0). Configuration
options: [Disabled] [Enabled]
Intel(R) SpeedStep(TM) Tech [Enabled]
Allows you to use the Enhanced Intel
®
SpeedStep
®
Technology. When set to
[Enabled]
, you
can adjust the system power settings in the operating system to use the EIST feature. Set
this item to
[Disabled]
if you do not want to use the EIST.
Configuration options: [Enabled] [Disabled]
2.4.3
Chipset
The
Chipset
menu allows you to change the advanced chipset settings. Select an item then
press
<Enter>
to display the submenu.
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI memory above the
total physical memory. Enable this option only when you install 64-bit operating system.
Configuration options: [Disabled] [Enabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configuring the DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to select the amout of system memory used by the IGD graphics device.
Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
PEG Port Configuration
PEG Port
Configuration options: [Disabled] [Auto]
The following item appears only when you installed an Intel
®
CPU that supports the
Enhanced Intel
®
SpeedStep
®
Technology (EIST).
Summary of Contents for P5KPL IPC SI
Page 1: ...Motherboard P5KPL IPC SI ...
