Asus P5E3 Premium WiFi-APn User Manual Download Page 136

Page: 136 / 200

5-18

Chapter 5: Software support

5.3.4 ASUS AI Suite

ASUS AI Suite allows you to launch AI Gear 3

, AI Booster, AI Nap, and Q-Fan 2

utilities easily.

Install the

ASUS EPU + AI Gear 3 Driver

before the ASUS AI Suite utility.

Otherwise, the ASUS AI Suite will not function properly.

Installing AI Suite

To install AI Suite on your computer:
1. Place the support DVD to the optical drive. The Drivers installation tab

appears if your computer has an enabled Autorun feature.

2. Click the Utilities tab, then click

AI Suite

3. Follow the screen instructions to complete installation.

Launching AI Suite

You can launch AI Suite right after installation or anytime from the Windows

desktop.
To launch AI Suite from the Windows

desktop, click

Start

All Programs

ASUS

AI Suite

AI Suite v1.xx.xx

. The AI Suite main window appears.

After launching the application, the AI Suite icon appears in the Windows

taskbar.

Click this icon to close or restore the application.

Using AI Suite

Click the AI Gear 3

, AI Nap, AI Booster, or Q-Fan 2 icon to launch the utility, or

click the Normal icon to restore the system to normal state.

Press to launch AI Gear 3

Press to launch AI Nap

Press to launch Q-Fan 2

Press to launch AI Booster

Press to restore to normal

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands

Asus P5E3 Premium WiFi-APn, User Manual

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands