manualshive.com logo in svg

Asus Motherboard P4GE-V, User Manual, Page: 95 / 132

Share
Download
Asus Motherboard P4GE-V User Manual Download Page 95

ASUS P4GE-V motherboard user guide

4-33

4.5.2 Hardware Monitor

MB Temperature [xxxC/xxxF]
CPU Temperature [xxxC/xxxF]
POWER Temperature [Ignore]

The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures.

If your power supply comes with a two-pin thermal sensor cable, connect
this cable to the TRPWR connector on the motherboard to allow BIOS to
auto-detect the power supply temperature (see page 2-22 for the location
of the TRPWR connector). The POWER temperature item shows the
detected value if you have the appropriate power supply. Select [Ignore] to
disable the power temperature auto-detect function.

Q-Fan Control [Disabled]

This item allows you to enable or disable the ASUS Q-Fan feature that
smartly adjusts the fan speeds for more efficient system operation. When
this field is set to [Enabled], the 

Fan Speed Ratio

 and 

Speed Up/Down

Response Time

 items appear to allow selection of the appropriate fan

speeds and the corresponding response time. Configuration options:
[Disabled] [Enabled]

Summary of Contents for Motherboard P4GE-V





































































































































Reviews:

No comments