ASUS MCI-10G/X550-2T
2-5
2.2.2
iSCSI CHAP Configuration
Use the Up/Down arrow key to select an item and press <spacebar> to change between
Enabled [
*
] or Disabled [ ].
[ ] Use CHAP
When Enabled [
*
], the iSCSI boot host software uses CHAP authentication when connecting
to the iSCSI target. Key in the necessary parameters.
When Disabled [ ], the iSCSI boot host software does not attempt to boot from the iSCSI
target after successfully connecting to it. The control will then return to the system BIOS so
that the next boot device may be used.
[ ] Use Mutual CHAP
When Enabled [
*
], the iSCSI boot host software uses a Mutual CHAP authentication when
connecting to the iSCSI target. Key in the necessary parameters.
When Disabled [ ], the iSCSI boot host software does not use a Mutual CHAP authentication
when connecting to the iSCSI target.
Intel(R) iSCSI Remote Boot v3.0.84
Copyright(c) 2003-2014 Intel Corporation. All rights reserved.
iSCSI CHAP Configuration
[ ] Use CHAP
User Name:
Target Secret:
[ ] Use Mutual CHAP
Initiator Secret:
Minimum CHAP secret length is 12 and maximum 16.
[OK] [Cancel]
Specify the same authentication information
as configured on the target.
