Asus Maximus VII Manual Download Page 189

Page: 189 / 224

ASUS MAXIMUS VII FORMULA

4-37

Chapter 4

Sonic SenseAmp

Sonic SenseAmp is an exclusive ROG invention that is a built-in headphone AMP on onboard

audio with three AMP levels adjustment. It detects your headphone’s impedance and adjusts

the built-in AMP accordingly.

Sonic SenseAmp only works on front panel.

When you plug a headphone into the front headphone jack, Sonic SenseAmp displays a pop-

up window that displays “Detecting headphone impedance”.

After detecting the headphone’s impedance, Sonic SenseAmp displays another pop-up

window similar to the one shown below.

Refer to the table below on the behavior of Sonic SenseAmp when adjusting the impedance

of the detected headphone:

65 ohm or below

Amplify Level is automatically set at Performance

65 ohm to 150 ohm

Amplify Level is automatically set at Powerful

> 150 ohm

Amplify Level is automatically set at Extreme

Other device

The device plugged in detected as other device

Summary of Contents for Maximus VII

































































































































































































































Search results

Summary of Contents for Maximus VII

Reviews:

Asus Maximus VII, Manual, Page: 189 / 224

Search results

Summary of Contents for Maximus VII

Reviews: