Asus Maximus V Extreme User Manual Download Page 212

Page: 212 / 246

6-2

Chapter 6: Multiple GPU support

Chapter 6

6.1.3

Installing two CrossFireX™ graphics cards

The following pictures are for reference only. The graphics cards and the motherboard

layout may vary with models, but the installation steps remain the same.

Prepare two CrossFireX-ready

graphics cards.

Insert the two graphics card into the

PCIEX16 slots. If your motherboard

has more than two PCIEX16 slots,

refer to Chapter 1 in this user manual

for the locations of the PCIEX16 slots

recommended for multi-graphics card

installation.

Ensure that the cards are properly

seated on the slots.

Align and firmly insert the CrossFireX

bridge connector to the goldfingers on

each graphics card. Ensure that the

connector is firmly in place.

Goldfingers

CrossFireX bridge

(bundled with

graphics cards)

Summary of Contents for Maximus V Extreme























































































































































































































































Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands

Asus Maximus V Extreme, User Manual

Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands