Asus Maximus iv extreme rev 3 User Manual Download Page 191

Page: 191 / 196

ROG Maximus IV Extreme-Z

5-9

5.3

LucidLogix

Virtu™ solution

LucidLogix

Virtu™� is a new generation GPU virtualization software that blurs

the line between embedded graphics and discrete GPU for increased graphics

performance. Its GPU virtualization dynamically assigns tasks to the best

available graphics resources based on power, performance and system load.

It allows users to fully utilize the unique capabilities of advanced Sandy Bridge

multimedia features alongside the high end 3D rendering performance provided by

installed graphics cards. For users with diverse needs, LucidLogix

Virtu™ GPU

virtualization provides great flexibility and efficiency.

• LucidLogix

Virtu™ supports Windows

7 operating systems.

• Intel

Quick Sync Video feature is supported by 2nd generation Intel

Core™ processor family.

• iGPU Multi-Monitor support option has to be enabled in BIOS before

installing LucidLogix

Virtu™.

• Supports NVIDIA

GF4xx/ 5xx series & AMD

HD5xxx/ 6xxx series graphic

cards.

5.3.1

Hardware installation

To install LucidLogix

Virtu™:

1. Place the support DVD to

the optical drive. The Drivers

installation tab appears if your

computer has enabled the

Autorun feature.

2. Click the Drivers tab, then click

LucidLogix

Virtu™ software.

3. Follow the onscreen instructions

to complete installation.

d-Mode (output from the discrete GPU)

i-Mode (output from

the Sandy Bridge

GPU)

Summary of Contents for Maximus iv extreme rev 3





































































































































































































Search results

Summary of Contents for Maximus iv extreme rev 3

Reviews:

Asus Maximus iv extreme rev 3, User Manual, Page: 191 / 196

Search results

Summary of Contents for Maximus iv extreme rev 3

Reviews: