Asus Maximus iv extreme rev 3 User Manual Download Page 157

Page: 157 / 196

ASUS Maximus IV Extreme-Z

4-13

4.3.6

Probe II

Probe II is a utility that monitors the computer’s vital components, and detects and

alerts you of any problem with these components. Probe II senses fan rotations,

CPU temperature, and system voltages, among others. With this utility, you are

assured that your computer is always at a healthy operating condition.

Launching Probe II

After installing AI Suite II from the motherboard support DVD, launch Probe II by

clicking

Tool > Probe II

on the AI Suite II main menu bar.

Loads the

default threshold

values for each

sensor

Applies your

changes

Loads

your saved

configuration

Saves your

configuration

Configuring Probe II

Click the

Voltage/Temperature/Fan Speed

tabs to activate the sensors or to

adjust the sensor threshold values. The

Preference

tab allows you to customize

the time interval of sensor alerts, or change the temperature unit.

Refer to the software manual in the support DVD or visit the ASUS website at

www.asus.com for detailed software configuration.

Summary of Contents for Maximus iv extreme rev 3





































































































































































































Search results

Summary of Contents for Maximus iv extreme rev 3

Reviews:

Asus Maximus iv extreme rev 3, User Manual, Page: 157 / 196

Search results

Summary of Contents for Maximus iv extreme rev 3

Reviews: