Asus Maximus iv extreme rev 3 User Manual Download Page 146

Page: 146 / 196

4-2

Chapter 4: Software support

4.2.2

Obtaining the software manuals

The software manuals are included in the support DVD. Follow the instructions

below to get the necessary software manuals.

The software manual files are in Portable Document Format (PDF). Install the

Adobe

Acrobat

Reader from the Utilities menu before opening the files.

The screenshots in this section are for reference only. The actual software

manuals containing in the support DVD vary by models.

1. Click the

Manual

tab. Click

ASUS Motherboard Utility

Guide

from the manual list on

the left.

2. The

Manual

folder of the

support DVD appears. Double-

click the folder of your selected

software.

3. Some software manuals

are provided in different

languages. Double-click

the language to show the

software manual.

Summary of Contents for Maximus iv extreme rev 3





































































































































































































Search results

Summary of Contents for Maximus iv extreme rev 3

Reviews:

Asus Maximus iv extreme rev 3, User Manual, Page: 146 / 196

Search results

Summary of Contents for Maximus iv extreme rev 3

Reviews: