Asus Maximus iv extreme rev 3 User Manual Download Page 117

Page: 117 / 196

ASUS Maximus IV Extreme-Z

3-25

�.�.�

Onboard Devices Configuration

HD Audio Controller [Enabled]

[Enabled]

Enables the High Definition Audio Controller.

[Disabled]

Disables the controller.

The following two items appear only when you set the

HD Audio Controller

item to [Enabled].

Front Panel Type [HD]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or

high-definition audio depending on the audio standard that the front panel audio

module supports.
[HD]

Sets the front panel audio connector (AAFP) mode to high

definition audio.

[AC97]

Sets the front panel audio connector (AAFP) mode to legacy

AC’97.

Scroll down for more items.

Summary of Contents for Maximus iv extreme rev 3





































































































































































































Search results

Summary of Contents for Maximus iv extreme rev 3

Reviews:

Asus Maximus iv extreme rev 3, User Manual, Page: 117 / 196

Search results

Summary of Contents for Maximus iv extreme rev 3

Reviews: