Asus M5A97 LE R2.0 User Manual Download Page 115

Page: 115 / 132

ASUS M5A97 LE R2.0

5-3

Chapter 5

5.1.4

AMD

Option ROM utility

To enter the AMD

Option ROM utility:

Turn on the system.

During POST, press <Ctrl> + <F> to display the utility main menu.

The Main Menu allows you to select an operation to perform. The Main Menu options include:

View Drive Assignments:

shows the status of the hard disk drives.

LD View / LD Define Menu:

displays the existing RAID set information / creates a RAID

0, RAID 1, RAID 5 or RAID 10 configuration.

Delete LD Menu:

deletes a selected RAID set and partition.

Controller Configuration:

shows the system resources configuration.

Press <1>, <2>, <3>, or <4> to enter the option you need; press <ESC> to exit the utility.

The RAID BIOS setup screens shown in this section are for reference only and may not

exactly match the items on your screen.

The utility supports maximum four hard disk drives for RAID configuration.

•
•

Summary of Contents for M5A97 LE R2.0





































































































































Search results

Summary of Contents for M5A97 LE R2.0

Reviews:

Related manuals for M5A97 LE R2.0

Brands by name

Popular brands

Asus M5A97 LE R2.0, User Manual

Search results

Summary of Contents for M5A97 LE R2.0

Reviews:

Related manuals for M5A97 LE R2.0

Brands by name

Popular brands