Asus M4N72-E - Motherboard - ATX User Manual Download Page 64

Page: 64 / 72

2-20

ASUS M4N72-E

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

2.5.4

PCIPnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.

Plug And Play O/S [No]

When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you

install a Plug and Play operating system, the operating system configures the Plug and Play

devices not required for boot. Configuration options: [No] [Yes]

2.5.5

USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then

press

<Enter> to display the configuration options.

The

Module Version

and

USB Devices Enabled

items show the auto-detected values. If

no USB device is detected, the item shows

None

USB Functions [Enabled]

Allows you to enable or disable the USB Functions.

Configuration options: [Enabled] [Disabled]

The following items appear only when you set

USB Functions to [Enabled].

USB 2.0 Controller [Enabled]

Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]

The following two items appear only when you set the

USB 2.0 Controller

item to

[Enabled].

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12

Mbps). Configuration options: [FullSpeed] [HiSpeed]

Legacy USB Support [Enabled]

Allows you to enable or disable support for USB devices on legacy operating systems

(OS). Setting to Auto allows the system to detect the presence of USB devices at startup.

If detected, the USB controller legacy mode is enabled. If no USB device is detected, the

legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]

Summary of Contents for M4N72-E - Motherboard - ATX









































































Search results

Summary of Contents for M4N72-E - Motherboard - ATX

Reviews:

Related manuals for M4N72-E - Motherboard - ATX

Brands by name

Popular brands

Asus M4N72-E - Motherboard - ATX, User Manual

Search results

Summary of Contents for M4N72-E - Motherboard - ATX

Reviews:

Related manuals for M4N72-E - Motherboard - ATX

Brands by name

Popular brands