Asus M4A88T-M/USB3 User Manual Download Page 15

Page: 15 / 68

Serial ATA 3Gb/s technology and RAID support

This motherboard supports hard drives based on the Serial ATA (SATA)

3Gb/s storage specifications, delivering enhanced salability and doubling

the bus bandwidth for high-speed data saving and retrieval. It also

supports RAID 0, RAID 1, and RAID 0+1 configurations for Serial ATA

hard drives.

8-channel high definition audio

The onboard 8-channel HD audio (High Definition Audio, previously

codenamed Azalia) CODEC enables high-quality 192KHz/24-bit audio

output and jack-detect feature that automatically detects and identifies

what types of peripherals are plugged into the audio I/O jacks and notifies

users of inappropriate connection, which means there will be no more

confusion of Line-in, Line-out, and Mic jacks.

HDMI support

HDMI (High-Definition Multimedia Interface) is a set of digital video

standards that deliver multi-channel digital audio and uncompressed

digital video for full HD 1080p visuals through a single cable. Supporting

HDCP copy protection such as HD DVD and Blu-ray discs, HDMI

provides you with the highest-quality home theater experience.

HDMI/DVI/RGB support

This motherboard supports multiple digital and analog display output

interfaces - HDMI, DVI, and D-Sub. With such diversity of display outputs,

you are able to choose and upgrade display devices freely.

100% All High-quality Conductive Polymer Capacitors

This motherboard uses high-quality conductive polymer capacitors for

durability, improved lifespan, and enhanced thermal capacity.

1.3.2

Innovative ASUS features

ASUS Express Gate

ASUS Express Gate is an instant-on environment that gives you quick

access to the Internet. Five seconds after powering on your computer,

you can instantly surf the Internet without entering the Windows

OS.

• ASUS Express Gate supports installation on SATA HDDs, USB HDDs and flash

drives with at least 1.2GB free disk space. When installing it on USB HDDs or

flash drives, connect the drives to the motherboard USB port before turning on the

computer.

• The actual boot time depends on the system configuration.
• ASUS Express Gate supports file uploading from SATA HDDs, ODDs and USB

drives. It supports file downloading to USB drives only.

ASUS M4A88T-M/USB3

1-3

Summary of Contents for M4A88T-M/USB3





































































Search results

Summary of Contents for M4A88T-M/USB3

Reviews:

Related manuals for M4A88T-M/USB3

Brands by name

Popular brands

Asus M4A88T-M/USB3, User Manual

Search results

Summary of Contents for M4A88T-M/USB3

Reviews:

Related manuals for M4A88T-M/USB3

Brands by name

Popular brands