Asus M4A77T/USB3 Page 54 User Manual Download

Page: 54 / 62

2-16

Chapter 2: BIOS information

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Suspend Mode [Auto]

ACPI 2.0 Support

[Enabled]

ACPI APIC support

[Enabled]

APM Configuration

HW Monitor Configuration

Anti Surge Support

[Enabled]

Select the ACPI state

used for System

Suspend.

BIOS SETUP UTILITY

Main Advanced

Power

Boot Tools Exit

Power Settings

2.5.1

Suspend Mode [Auto]

Selecta the Advanced Configuration and Power Interface (ACPI) state to be used for system

suspend. Configuration options: [S1 (POS) Only] [S3 Only] [Auto]

2.5.2

ACPI 2.0 Support [Enabled]

Enables or disables the Advanced Configuration and Power Interface (ACPI) 2.0 support.

Configuration options: [Disabled] [Enabled]

2.5.3

ACPI APIC Support [Enabled]

Enables or disables the Advanced Configuration and Power Interface (ACPI) support in the

Advanced Programmable Interrupt Controller (APIC). When this item is set to

[Enabled]

, the

ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled]

[Enabled]

2.5.4

APM Configuration

Restore on AC Power Loss [Always Off]

When this item set to

[Always Off]

, the system goes into off state after an AC power loss.

When this item set to

[Always On]

, the system goes on after an AC power loss. When set

[Last State]

, the system goes into either off or on state, whatever the system state was

before the AC power loss. Configuration options: [Power Off] [Power On] [Last State]

Power on From S5 By PME# [Disabled]

Enables or disables PME wake from sleep states. Configuration options: [Disabled] [Enabled]

Power on From S5 By Ring [Disabled]

Enables or disables ring to generate a wake event. Configuration options: [Disabled]

[Enabled]

2.5

Power menu

The Power menu items allow you to change the settings for the Advanced Configuration and

Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then

press

<Enter>

to display the configuration options.

Summary of Contents for M4A77T/USB3































































Search results

Summary of Contents for M4A77T/USB3

Reviews:

Related manuals for M4A77T/USB3

Brands by name

Popular brands

Asus M4A77T/USB3, User Manual

Search results

Summary of Contents for M4A77T/USB3

Reviews:

Related manuals for M4A77T/USB3

Brands by name

Popular brands