Asus M4A77T/USB3 Page 46 User Manual Download

Page: 46 / 62

2-8

Chapter 2: BIOS information

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting this item to

[Auto]

enables the LBA mode if the

device supports this mode, and if the device was not previously formatted with LBA mode

disabled. Configuration options: [Disabled] [Auto]

Block (Multi-Sector Transfer) M [Auto]

Enables or disables data multi-sectors transfers. When this item is set to

[Auto]

, the data

transfer from and to the device occurs multiple sectors at a time if the device supports multi-

sector transfer feature. When this item is set to

[Disabled]

, the data transfer from and to the

device occurs one sector at a time. Configuration options: [Disabled] [Auto]

PIO Mode [Auto]

Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode. Configuration options: [Auto]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology.

Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled]

2.3.4

SATA Configuration

The

SATA Configuration

menu allows you to configure your storage devices. Select an item

then press

<Enter>

to display the submenu.

OnChip SATA Channel [Enabled]

Enables or disables OnChip SATA Channel. Configuration options: [Disabled] [Enabled]

SATA Port1 – Port4 [IDE]

Configures SATA 1/2/3/4. Configuration options: [IDE] [RAID] [AHCI]

SATA Port5 – Port6 [IDE]

Configures SATA 5/6. Configuration options: [IDE] [RAID] [AHCI]

The following two items only appear when you set

OnChip SATA Channel

to [

Enabled

• When SATA 1/2/3/4 are configured as

[IDE]

, SATA 5/6 can only be configured as

[IDE]

• When SATA 1/2/3/4/5/6 are configured as

[AHCI]

, only SATA 1/2/3/4 can be detected

under OS. Ensure to install the AHCI driver, so that you can use SATA 1/2/3/4/5/6 in

AHCI mode under OS.

• When SATA 1/2/3/4 are configured as

[AHCI]

and SATA 5/6 are configured as

[IDE]

, you

can access the devices on SATA 5/6 before entering OS.

Summary of Contents for M4A77T/USB3































































Search results

Summary of Contents for M4A77T/USB3

Reviews:

Related manuals for M4A77T/USB3

Brands by name

Popular brands

Asus M4A77T/USB3, User Manual

Search results

Summary of Contents for M4A77T/USB3

Reviews:

Related manuals for M4A77T/USB3

Brands by name

Popular brands