2-8
Chapter 2: BIOS setup
To update the BIOS using EZ Flash 2:
1. Visit the ASUS website at www.asus.com to download the latest BIOS file for
the motherboard.
2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the
system.
3. You can launch the EZ Flash 2 by two methods.
(1) Insert the floppy disk / USB flash disk that contains the BIOS file to the
floppy disk drive or the USB port.
Press
<Alt>
+
<F2>
during POST to display the following.
2.1.4
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go
through the long process of booting from a floppy disk and using a DOS-based
utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing
<Alt> + <F2>
during the Power-On Self Tests (POST).
ASUSTek EZ Flash 2 BIOS ROM Utility V3.25
Current ROM
Update ROM
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [ESC] Exit
FLASH TYPE:
MXIC 25L8005
PATH:
A:\
BOARD:
M3A78-CM
VER:
0303 (H:00 B:02)
DATE: 0
5/30/2008
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
(2) Enter BIOS setup program. Go to the
Tools
menu then select
EZ Flash2
and press
<Enter>
.
You can switch between drives by pressing
<Tab>
before the correct file
is found. Then press
<Enter>
.
Summary of Contents for M3A78-CM - Motherboard - Micro ATX
Page 1: ...Motherboard M3A78 CM ...