1.7.3
Installing a DIMM
Unplug the power supply before adding or removing DIMMs or other system components.
Failure to do so can cause severe damage to both the motherboard and the components.
Unlocked retaining clip
1
DDR2 DIMM notch
1.
Unlock a DDR2 DIMM socket by
pressing the retaining clips outward.
2.
Align a DIMM on the socket such that
the notch on the DIMM matches the
break on the socket.
2
1
A DDR2 DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a
DIMM into a socket to avoid damaging the DIMM.
3.
Firmly insert the DIMM into the socket
until the retaining clips snap back in place
and the DIMM is properly seated.
Locked Retaining Clip
3
1.7.4
Removing a DIMM
To remove a DIMM:
1.
Simultaneously press the retaining clips
outward to unlock the DIMM.
2.
Remove the DIMM from the socket.
Support the DIMM lightly with your
fingers when pressing the retaining
clips. The DIMM might get damaged
when it flips out with extra force.
DDR2 DIMM notch
1
1
2
Chapter 1: Product introduction
1-15
Summary of Contents for M2N68 SE
Page 1: ...Motherboard M2N68 SE ...
Page 60: ...2 24 ASUS M2N68 SE ...
