Get Started
10
nüvifone M10 Owner’s Manual
Replace the Battery Cover
Slide the battery cover onto the back of
the device until it clicks.
Charge the Battery
Notice
Your nüvifone will not charge if it
has exceeded the maximum charging
temperature of 122°F (50°C). If the
nüvifone is mounted in the windshield,
remove it from the mount and place it
somewhere out of direct sunlight.
Charge the battery for at least four
hours before using the nüvifone for the
first time.
1. Insert the plug into the AC power
adapter, if necessary.
2. Plug the USB cable into the AC
adapter.
3. Connect the micro-USB end of the
USB cable to the connector on the
side of the device.
4. Plug the AC adapter into a power
outlet.
If you completely discharge the battery,
recharge it for at least 20 minutes
before turning on your nüvifone.
Alternate Charging Methods
(Preferred and fastest method)
Insert your nüvifone into the cradle,
and connect the vehicle power
cable to the cradle.
Connect the vehicle power cable to
your nüvifone.
Connect your nüvifone to a
computer using the USB cable
included in the box.
Insert the battery into the battery
charger (accessory). For more
information about accessories, go to
•
•
•
•