Installation Quick Start Guide
19
UnixWare 7.1.1 Installation
7. If your NetWare startup directory is drive C:, then run
A:\INSTALL\NWUPDATE.BAT, otherwise create a subdirectory named
NWUPDATE at the root of your boot drive and copy all the files from
A:\DRIVERS\5XX to the NWUPDATE subdirectory.
8. Leave the NetWare 5.0 bootable CD in place, but remove the driver diskette from drive
A:.
9. Reboot the server. After rebooting the server, the NetWare 5.0 Install will start again.
10. Right after the Accept the License Agreement screen, select the "Continue with
Existing Partition" option.
Note:
If you chose to install a "New Server," you may encounter the following warning dialog
box:
“Warning: A previously installed version of NetWare was detected in C:\NWSERVER.
If you choose to install a new server, all data on the existing server will be lost. <Press
ENTER to continue>”.
If the warning dialog box appears, press <Enter>.
11. Complete the installation.
2.6.2.3
New Installation of NetWare 5.1x with the SRCRX.HAM Driver
1. Create a driver diskette from the RAID Software Suite CD-ROM. See
for
details to create this disk.
2. Start the OS installation from the NetWare bootable CD-ROM.
3. At the storage driver summary menu select modify drivers.
4. Insert the driver diskette into drive A:
5. Press <Enter> on the storage driver list.
6. Press <Insert> in the storage controller driver menu.
7. Press <F3> and change the path to A:\DRIVERS\5XX then press <Enter>.
8. Select the SRCRX.HAM driver.
9. Complete the installation.
2.7
UnixWare 7.1.1 Installation
2.7.1
Minimum Requirements
•
RAID Software Suite CD-ROM
•
20 MB of free hard disk space
•
RAID Software Suite Driver Installation diskette for UnixWare (see
for
instructions to create this diskette).
