32
Single Board Computer
Safety information
Your Edge Computer is designed and tested to meet the latest standards
of safety for information technology equipment. However, to ensure your
safety, it is important that you read the following safety instructions.
Setting up your system
•
Read and follow all instructions in the documentation before you
operate your system.
•
Do not use this product near water or a heated source.
•
Set up the system on a stable surface.
•
Peripherals with extended temperature tolerance (such as industrial
grade mSATA, Micro SD card, etc.) will allow this product to be used in
environments with ambient temperatures between -20˚C and 60˚C,
with air flow.
•
The product should be used in environments with an ambient
temperature of 40˚C when using the 65W adapter.
•
If you use an extension cord, make sure that the total ampere rating
of the devices plugged into the extension cord does not exceed its
ampere rating.
•
This equipment should be installed and operated with a minimum
distance of 20cm between the radiator and your body.
•
Restricted Access Location:
The equipment should only be installed in a Restricted Access Area
where both these conditions apply:
- access can only be gained by USERS who have been instructed about
the reasons for the restrictions applied to the location and about any
precautions that shall be taken; and
- access is through the use of a TOOL or lock and key, or other means
of security, and is controlled by the authority responsible for the
location.
•
This device shall not be connected to an Ethernet network with outside
plant routing.
Summary of Contents for IMX8P-IM-A
