Asus Hummingbird User Manual Download Page 81

Page: 81 / 112

ASUS Hummingbird

5-5

5.2

Marvell

6121 RAID BIOS

configuration utility

The Marvell

6121 RAID BIOS Configuration utility allows you to create

RAID 0 and RAID 1 set(s) from Serial ATA hard disk drives that are connected to

the Serial ATA connectors supported by the Southbridge.
To enter the Marvell

RAID BIOS Configuration utility:

1.  Install all the Serial ATA hard disk drives at Red SATA Connector.
2.  Turn on the system.
3.  During POST, press <Ctrl> + <M> to enter the utility main menu.

The RAID BIOS setup screens shown in this section are for reference only and

may not exactly match the items on your screen.

ENTER/SPACE:Select, ESC:Back/Exit

Adapter 1

Arrays Information:

No array is defined!

Disks Information:

ID Port Disk Name Size Speed Status

0 0 SATA: Hitachi HDS721010KLA330 1TB SATA II FREE

4 1 SATA: Hitachi HDS721010KLA330 1TB SATA II FREE

[

Adapter]

[

Create]

[

Delete]

4. Press <Enter> and select a desired adapter for RAID configuration.

ENTER/SPACE:Select, ESC:Back/Exit

Select Adapter

Adapter 1

[

Adapter]

[

Create]

[

Delete]

Adapter 1

Summary of Contents for Hummingbird

















































































































Search results

Summary of Contents for Hummingbird

Reviews:

Related manuals for Hummingbird

Brands by name

Popular brands

Asus Hummingbird, User Manual

Search results

Summary of Contents for Hummingbird

Reviews:

Related manuals for Hummingbird

Brands by name

Popular brands