Asus Hummingbird User Manual Download Page 67

Page: 67 / 112

ASUS Hummingbird

4-23

4.6

Power menu

BIOS SETUP UTILITY

Main

Advanced Server

Power

Boot Tools Exit

Suspend Mode

[Auto]

ACPI 2.0 Support

[Enabled]

ACPI APIC Support

[Enabled]

EuP Ready

[Disabled]

APM Configuration

Hardware Monitor

←→

Select Screen

↑↓

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Select the ACPI state

used for System

Suspend.

4.6.1

Suspend Mode [Auto]

Allows you to select the Advanced Configuration and Power Interface (ACPI) state

to be used for system suspend.

Configuration options: [S1 (POS) only] [S3 only] [Auto]

4.6.2

ACPI 2.0 Support [Enabled]

Add additional tables as per ACPI 2.0 specifications.

Configuration options: [Disabled] [Enabled]

4.6.3

ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface

(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When

set to [Enabled], the ACPI APIC table pointer is included in the RSDT pointer list.

Configuration options: [Disabled] [Enabled]

4.6.4

EuP Ready [Disabled]

Allows you to disable or enable the Energy Using Products (EuP) Ready function.

Setting to [Enabled] allows BIOS to switch off some power at S5 state to get

system ready for the EuP requirement. When set to [Enabled], power for WOL,

WO_USB, audio and onboard LEDs will be switched off at S5 state.

Summary of Contents for Hummingbird

















































































































Search results

Summary of Contents for Hummingbird

Reviews:

Related manuals for Hummingbird

Brands by name

Popular brands

Asus Hummingbird, User Manual

Search results

Summary of Contents for Hummingbird

Reviews:

Related manuals for Hummingbird

Brands by name

Popular brands