11
GigaX2008EX L2 Managed Switch User Manual
4 Management with the Web Interface
The switch provides Web pages that allow switch management through the
Internet. The program is designed to work best with Microsoft Internet Explorer
®
5.5, or later versions.
NOTE:
Netscape is not supported.
4.1 Log into Web user interface
1. From a PC, open your web browser, type the following in the web address (or
location) box, and press
<Enter>
:
http://192.168.1.1
This is the factory default IP address for the switch. A login screen displays,
as shown in Figure 8
Figure 8. Configuration manager login screen
Login is not required if you do not enable Web authentication
access (see 3.3.2)”
2. Enter your user name and password, then click
OK
.
Use the following defaults the first time you log into the program. You can
change the password at any time through CLI interface (see section 5.3.1)
Default User Name: admin
Default Password:<no password>
