Asus G1-P5G43, User Manual

Page: 34 / 78

2-18 Chapter 2: Basic installation
2.7 Installing storage drives
2.7.1. Installing.an.optical.drive
2.7.2. Installing.a.hard.disk.drive
1. Place the chassis upright, then
remove the upper 5.25” drive bay
metal plate cover.
2. Insert the optical drive to the bay, then
carefully push the drive until its screw
holes align with the holes on the bay.
3. Secure the optical drive with two
screws on both sides of the bay.
4. For SATA ODD: Connect the SATA
signal and power plugs to the
connectors at the back of the drive.
For IDE ODD: Connect the IDE signal
and power plugs to the connectors at
the back of the drive.
2
3
3
SATA IDE 4
1. Locate the 3.5-inch hard disk drive
bay.
2. Insert the hard disk drive to the
3.5-inch hard disk drive bay, then
carefully push the drive until its screw
holes align with the holes on the
bracket.
3. Secure the hard disk drive with two
screws on both sides of the bay.
4. For SATA HDD: Connect the SATA
signal and power plugs to the
connectors at the back of the drive.
For IDE HDD: Connect the IDE signal
and power plugs to the connectors at
the back of the drive.
3
3
2
SATA IDE
4