Asus F2A85-V PRO User Manual Download

Page: 148 / 172

4-44

Chapter 4: Software support

Chapter 4

4.4.2

Installing Serial ATA hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance, install

identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID configuration:

Install the SATA hard disks into the drive bays.

Connect the SATA signal cables.

Connect a SATA power cable to the power connector on each drive.

4.4.3

Setting the RAID item in BIOS

You must enable the RAID function in the BIOS Setup before creating RAID set(s) using

SATA HDDs. To do this:
1.

Enter the BIOS Setup during POST.

Go to the

Advanced

menu >

SATA Configuration

, and then press <Enter>.

Set the type of the SATA connectors to

[RAID]

Save your changes, and then exit the BIOS Setup.

See section

3.5.2 SATA Configuration

for details.

Summary of Contents for F2A85-V PRO













































































































































































Search results

Summary of Contents for F2A85-V PRO

Reviews:

Related manuals for F2A85-V PRO

Brands by name

Popular brands

Asus F2A85-V PRO, User Manual

Search results

Summary of Contents for F2A85-V PRO

Reviews:

Related manuals for F2A85-V PRO

Brands by name

Popular brands