Asus F1A75-V PRO User Manual Download Page 60

Page: 60 / 124

3-2

Chapter 3: BIOS setup

Chapter 3

3.2.1

ASUS Update utility

The ASUS Update is a utility that allows you to manage, save, and update the motherboard

BIOS in Windows

environment. The ASUS Update utility allows you to:

•  Save the current BIOS file
•  Download the latest BIOS file from the Internet
•  Update the BIOS from an updated BIOS file

• Update the BIOS directly from the Internet
• View the BIOS version information
This utility is available in the support DVD that comes with the motherboard package.

ASUS Update requires an Internet connection either through a network or an Internet

Service Provider (ISP).

Launching ASUS Update

After installing AI Suite II from the motherboard support DVD, launch ASUS Update by

clicking

Update > ASUS Update

on the AI Suite II main menu bar.

Quit all Windows

applications before you update the BIOS using this utility.

Updating the BIOS through the Internet

To update the BIOS through the Internet:

From the ASUS Update screen,

select

Update BIOS from Internet

and then click

Next

Select the ASUS FTP site nearest

you to avoid network traffic.

If you want to enable the BIOS

downgradable function and auto

BIOS backup function, check the

checkboxs before the two items on

the screen.

Summary of Contents for F1A75-V PRO





























































































































Search results

Summary of Contents for F1A75-V PRO

Reviews:

Related manuals for F1A75-V PRO

Brands by name

Popular brands

Asus F1A75-V PRO, User Manual

Search results

Summary of Contents for F1A75-V PRO

Reviews:

Related manuals for F1A75-V PRO

Brands by name

Popular brands