Asus ET2020A Series User Manual Download

Page: 59 / 67

English

All-in-One PC ET2020 Series

5. Select the USB storage device where you want to

copy the recovery files.

6. Click

Next

Recovering from a system image file in Windows

You can create a USB recovery drive and use this to recover your PC’s settings.

Creating a USB recovery drive

WARNING!

All files on your USB storage device will be permanently deleted during the process.

Before you proceed, ensure that you back up all your important data.

To create a USB recovery drive:

1. Launch the Control Panel from the All Apps screen.

NOTE:

For details, refer to

Launching the All Apps screen

under

Working with Windows® apps

2. From the Control Panel’s System and Security, click

Find and fix problems

3. Tap or click

Recovery

Create a recovery drive

4. Tap or click

Next

NOTE:

If the check box is not ticked, no device drivers

and apps will be installed in the recovery device.

Summary of Contents for ET2020A Series




































































Search results

Summary of Contents for ET2020A Series

Reviews:

Related manuals for ET2020A Series

Brands by name

Popular brands

Asus ET2020A Series, User Manual

Search results

Summary of Contents for ET2020A Series

Reviews:

Related manuals for ET2020A Series

Brands by name

Popular brands