Asus ESC700 User Manual Download Page 156

Page: 156 / 160

6-8

Chapter 6: Driver Installation

6.5

Audio configurations

The Realtek

audio CODEC provides 8-channel audio capability to deliver the ultimate audio

experience on your computer. The software provides Jack-Sensing function, S/PDIF Out

support, and interrupt capability. The CODEC also includes the Realtek

proprietary UAJ

(Universal Audio Jack) technology for all audio ports, eliminating cable connection errors, and

giving users plug and play convenience.

Follow the installation wizard to install the Realtek

Audio Driver from the support DVD that

came with the motherboard package.
If the Realtek

audio software is correctly installed, you will find the Realtek

HD Audio

Manager icon on the taskbar. Double-click

or tap on the icon to display the Realtek

Audio Manager.

Realtek

HD Audio Manager

Realtek

HD Audio Manager with DTS UltraPC II for Windows

8.1 / Windows

8 / Windows

Configuration option tabs (vary with the audio devices connected)

Advanced settings

Set default device

button

Control settings panel

Analog and digital connector status

Summary of Contents for ESC700

































































































































































Search results

Summary of Contents for ESC700

Reviews:

Brands by name

Popular brands

Asus ESC700, User Manual

Search results

Summary of Contents for ESC700

Reviews:

Brands by name

Popular brands