Asus ESC4000 G3 Series User Manual Download Page 21

Page: 21 / 206

ASUS ESC4000 G3/G3S Series

1-9

1.6

Internal features

The barebone server includes the basic components as shown.

The barebone server does not include a floppy disk drive or an optical dirve. Connect a

USB floppy disk drive to any of the USB ports on the front or rear panel if you need to use a

floppy disk.

*WARNING

HAZARDOUS MOVING PARTS

KEEP FINGERS AND OTHER BODY PARTS AWAY

Redundant Power supply

and power fan (hidden)

ASUS Z10PG-D16 Server

Board

System fans

SATA/SAS backplane

(hidden)

Hot-swap HDD tray (SAS

and SATA)

PCI-E Expansion Boards

(hidden)

PCI-E x24 slot (hidden)

with butterfly riser card

A protection film is pre-attached to the front cover before shipping. Please remove the

protection film before turning on the system for proper heat dissipation.

Summary of Contents for ESC4000 G3 Series















































































































































































































Search results

Summary of Contents for ESC4000 G3 Series

Reviews:

Brands by name

Popular brands

Asus ESC4000 G3 Series, User Manual

Search results

Summary of Contents for ESC4000 G3 Series

Reviews:

Brands by name

Popular brands