5-30
Chapter 5: BIOS setup
5.6
Boot menu
The Boot menu items allow you to change the system boot options. Select an item
then press <Enter> to display the sub-menu.
5.6.1
Boot Device Priority
1st ~ xxth Boot Device [XXXXXXX]
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system. Configuration options: [xxxxx Drive] [Disabled]
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Advanced Server
Boot
Exit
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
←→
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the first boot
device.
5.6.2
Boot Settings Configuration
BIOS SETUP UTILITY
Boot
Boot Device Priority
1st Boot Device
[Removable Dev.]
2nd Boot Device
[ATAPI CD-ROM]
3rd Boot Device
[Hard Drive]
4th Boot Device
[Network:IBA GE Slo]
5th Boot Device
[Network:IBA GE Slo]
Specifies the Boot
Device Priority
sequence.
A device enclosed
in parenthesis has
been disabled in the
corresponding type
menu.
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Quick Boot
[Enabled]
Full Screen Logo
[Enabled]
AddOn ROM Display Mode
[Force BIOS]
Bootup Num-Lock
[On]
Wait For ‘F1‘ If Error
[Enabled]
Hit ‘DEL‘ Message Display
[Enabled]
Interrupt 19 Capture
[Enabled]
Boot Device Seeking
[Endless PXE]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
