Asus ESC2000 User Manual Download Page 187

Page: 187 / 226

ASUS ESC2000 G2

6-13

6.2

Intel

Chipset Device Software

installation

This section provides the instructions on how to install the Intel

chipset device software on

the system.
You need to manually install the Intel

chipset device software on a Windows operating

system.
To install the Intel

chipset device software:

Restart the computer, and then log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive. The support DVD

automatically displays the

Drivers

menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

Click the item

Intel Chipset Device Software

from the menu.

The

Intel(R) Chipset Device Software

window appears. Click

Next

to start installation.

Summary of Contents for ESC2000



































































































































































































































Search results

Summary of Contents for ESC2000

Reviews:

Brands by name

Popular brands

Asus ESC2000, User Manual

Search results

Summary of Contents for ESC2000

Reviews:

Brands by name

Popular brands