manualshive.com logo in svg

Asus ESC2000, User Manual

Share
Download
Asus ESC2000 User Manual Download Page 162

5-32

Chapter 5: RAID configuration

5.3.7 

Setting the Boot array in the BIOS Setup Utility

You can set the boot priority sequence in the BIOS for your RAID arrays when creating multi-

RAID using the Intel

®

 Rapid Storage Technology. 

To set the boot array in the BIOS:

Set at least one of the arrays bootable to boot from the hard disk.

1. 

Reboot the system and press <Del> to enter the BIOS setup utility during POST.

2. 

Go to the 

Boot

 menu and select the boot option priority.

3. 

Use up/down arrow keys to select the boot priority and press <Enter>. See section 

4.7 

Boot menu

 for details. 

4. 

From the 

Exit

 menu, select 

Save Changes & Exit

, then press <Enter>.

5. 

When the confirmation window appears, select 

Yes

, then press <Enter>.

Summary of Contents for ESC2000



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands