Asus ESC1000 User Manual Download

Page: 171 / 194

ASUS ESC1000 G2

6-17

6.3.6

Sensor Recorder

Sensor Recorder monitors the changes in the system voltage, temperature, and fan speed on

a timeline. The History Record function allows you to designate specific time spans on record

to keep track of the three system statuses for certain purposes.

Launching Sensor Recorder

To launch Sensor Recorder, click

Tool > Sensor Recorder

on the AI Suite II main menu

bar.

Using Sensor Recorder

Click on

Voltage/ Temperature/ Fan Speed

tabs for the status you want to monitor. Colored

lines will automatically appear on the diagram to indicate the immediate changes in the

system status.

Using History Record

Click the

History Record

tab and adjust the settings on the left for

Record

Interval

and

Record Duration

according to need.

Click

Start

Recording

to start measuring and recording each sensor.

To stop recording, click

Recording

again.

To track the recorded contents, set

Type

Date

Select display items

to display the

history details.

Click

Monitor

> Sensor

on the AI Suite II main menu bar and the system status will appear

on the right panel.

Summary of Contents for ESC1000



































































































































































































Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands

Asus ESC1000, User Manual

Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands