Asus ESC1000 User Manual Download

Page: 170 / 194

6-16

Chapter 6: Driver installation

Refer to the software manual in the support DVD or visit the ASUS website at

www.asus.com for detailed software configuration.

6.3.5

FAN Xpert+

FAN Xpert+ intelligently allows you to adjust both the CPU and chassis fan speeds based on

the ambient temperatures and the system loading.

•

Disable:

Disables the

FAN Xpert+

function.

•

Standard:

Adjusts the fan speed based on the normal setting.

•

Silent:

Minimizes the fan speed for a quiet fan operation.

•

Turbo:

Maximizes the fan speed for the best cooling effect.

•

Intelligent:

Automatically adjusts the CPU fan speed according to the ambient

temperature.

•

Stable:

Stabilizes the CPU fan speed to avoid noise that resulted from an uneasy

fan rotation.

Under this mode, the fan will speed up when the temperature exceeds

70°C.

•

User:

Allows you to configure the CPU fan profile under certain limitations.

Launching FAN Xpert+

To launch FAN Xpert+, click

Tool > FAN Xpert+

on the AI Suite II main menu bar.

Using FAN Xpert+

To use Fan Xpert+:

From the

Fan Name

dropdown list, select the fan whose speed you want to adjust.

From the

Setting

dropdown list, select any of these modes for your selected fan:

Click to select a fan type Click to select a fan profile

Click to apply the

settings made
Click to discard the

settings made

Summary of Contents for ESC1000



































































































































































































Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands

Asus ESC1000, User Manual

Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands