Asus ESC1000 User Manual Download

Page: 161 / 194

ASUS ESC1000 G2

6-7

6.2.2

Obtaining the software manuals

The software manuals are included in the support DVD. Follow the instructions below to get

the necessary software manuals.

The software manual files are in Portable Document Format (PDF). Install the Adobe

Acrobat

Reader from the Utilities menu before opening the files.

The screenshots in this section are for reference only. The actual software manuals

containing in the support DVD vary by models.

Click on the

Manual

tab. Click on

ASUS Motherboard Utility Guide

from the manual list on the left.

The

Manual

folder of the support

DVD appears. Double-click the

folder of your selected software.

Some software manuals are provided

in different languages. Double-click

the language to show the software

manual.

Summary of Contents for ESC1000



































































































































































































Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands

Asus ESC1000, User Manual

Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands