Asus EBox1007P, User Manual

Page: 33 / 170

EB1007P 33
English
Using the USB storage device (USB
Restore)
When the Recovery Partition in your system is crashed, use the USB
storage device to restore the system to the factory default partition
or the factory environment data to the entire hard disk.
1. Connect the USB storage device that you back up the factory
environment data to.
2. Press <F8> for on bootup and the Please select boot device
screen appears. Select USB:XXXXXX to boot from the connected
USB storage device.
3. Select the language and click Next .
4. Select Restore and click Next .
5. Select a task and click Next . Task options:
Restore the OS to the Default Partition only
Select this option if you simply want to restore the OS to the
factory default partition. This option deletes all data on the
system partition “C” and keeps the partition “D” unchanged.
After you click Next, the factory default partition will be
displayed. Click
Next again.
Restore the Whole Hard Disk
Select this option if you want to restore your PC to the factory
default state. This option deletes all data from your hard disk
and creates a new system partition as drive “C” , an empty
partition as drive “D“ and a Recovery Partition.
6. Data on the factory default partition or on the whole hard disk
will be cleared depending on the option you selected in the
previous step. Click
Restore
to start the task.
7. When restore is successfully completed, click Reboot to restart
the system.