Asus DSL-AC87CG User Manual Download Page 10

Page: 10 / 111

1.4 Positioning your router

For the best wireless signal transmission between the wireless
router and the network devices connected to it, ensure that you:

•

Place the wireless router at the center of your network for

maximum wireless coverage.

•

Keep the device away from metal obstructions and away from

direct sunlight.

•

Keep the device away from 802.11g or 20MHz only Wi-Fi

devices, 2.4GHz computer peripherals, Bluetooth devices,

cordless phones, transformers, heavy-duty motors, fluorescent

lights, microwave ovens, refrigerators, and other industrial

equipment to prevent signal interference or loss.

•

To ensure the best wireless signal, orient the four detachable

antennas as shown in the drawing below.

•

Always update to the latest firmware. Visit the ASUS website

http://www.asus.com

to get the latest firmware updates.

Dual Band 802.11ac

Wi-Fi ADSL/VDSL VolP Modem Router

FON1

FON2

DECT

E-WAN

45°

90°

45°

Summary of Contents for DSL-AC87CG
















































































































Search results

Summary of Contents for DSL-AC87CG

Reviews:

Related manuals for DSL-AC87CG

Brands by name

Popular brands

Asus DSL-AC87CG, User Manual

Search results

Summary of Contents for DSL-AC87CG

Reviews:

Related manuals for DSL-AC87CG

Brands by name

Popular brands