Asus DSL-AC52U User Manual Download

Page: 52 / 129

4.1.4 Wireless MAC Filter

Wireless MAC filter provides control over packets transmitted to

a specified MAC (Media Access Control) address on your wireless

network.

To set up the Wireless MAC filter:

1. From the navigation panel, go to

Advanced Settings

Wireless

Wireless MAC Filter

tab.

2. Enable the

Mac Filter Mode

, then in the

MAC Filter Mode

dropdown list, select either

Accept

Reject

• Select

Accept

to allow devices in the MAC filter list to access

to the wireless network.

• Select

Reject

to prevent devices in the MAC filter list to

access to the wireless network.

3. On the MAC filter list, click the

Add

button and key in the

MAC address of the wireless device.

4. Click

Apply

Summary of Contents for DSL-AC52U


































































































































Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands

Asus DSL-AC52U, User Manual

Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands