Configuring the USB ports using the BIOS
You can enable or disable the front and rear USB 3.2 Gen 2 Type-C®, USB 3.2 Gen 1, USB 3.2 Gen 2
and USB 2.0 ports from the BIOS Setup.
To disable or enable the front and rear USB 3.2 Gen 2Type-C®, USB 3.2 Gen 1 and USB 2.0
ports:
1.
Press <Delete> to enter the BIOS Setup at startup.
2.
From the BIOS Setup EZ Mode screen, press <F7> to enter the Advanced Mode. From the
Advanced Mode screen, click
Advanced Mode
>
Security
>
I/O Interface Security
>
USB
Interface Security
>
USB Port Control
.
3.
Select the USB port that you want to enable or disable.
4.
Press <Enter> to enable or disable the selected USB port.
5. Click
Exit
and select
Save Changes & Reset
to save the changes made.
Refer to Chapter 1 for the location of the USB ports.
40
Chapter 3: Using your computer
ENGLISH
ENGLISH
