1-20
Chapter 1: Product Introduction
Chapter 1
1.1.9
Internal connectors
1. AMD
®
Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-8)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, and 10
configuration through the onboard AMD
®
X370 chipset.
•
These connectors are set to
[AHCI]
by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode Selection item in the BIOS to
[RAID]
.
•
Before creating a RAID set, refer to section
RAID configurations
or the manual
bundled in the motherboard support DVD.
•
When using NCQ, set the SATA Mode in the BIOS to [
AHCI
]. Refer to section
SATA
Configuration
for details.
