manualshive.com logo in svg

Asus Crosshair V Formula-Z, User Manual

Share
Download
Asus Crosshair V Formula-Z User Manual Download Page 121

ASUS CROSSHAIR V FORMULA-Z

3-41

Chapter 3

Label

Allows you to input the label of the setup profiles.

Save to Profile

Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a 

profile number from one to eight, press <Enter>, and then select 

Yes

.

Load from Profile

Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile 

number that saved your BIOS settings, press <Enter>, and then select 

Yes

.

• 

DO NOT shut down or reset the system while updating the BIOS to prevent the 

system boot failure!

• 

We recommend that you update the BIOS file only coming from the same memory/

We recommend that you update the BIOS file only coming from the same memory/

CPU configuration and BIOS version.

The 

O.C. Profile Configuration

 items show 

Not Installed

 if no profile is created.

3.8.3 

ASUS O.C. Profile

This item allows you to store or load multiple BIOS settings. 

Summary of Contents for Crosshair V Formula-Z































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands