Asus CM-32 User Manual Download

Page: 66 / 110

4.3.

DDNS

Setting up DDNS (Dynamic DNS) allows you to access the router

from outside your network through the provided ASUS DDNS

Service or another DDNS service.

To set up DDNS:

1. From the navigation panel, go to

Advanced Settings

WAN

DDNS

tab.

2. Configure the following settings below. When done, click

Apply

•

Enable the DDNS Client

: Enable DDNS to access the ASUS

router via the DNS name rather than WAN IP address.

•

Server and Host Name

: Choose ASUS DDNS or other DDNS.

If you want to use ASUS DDNS, fill in the Host Name in the

format of xxx.asuscomm.com (xxx is your host name).

•

If you want to use a different DDNS service, click FREE TRIAL

and register online first. Fill in the User Name or E-mail

Address and Password or DDNS Key fields.

Summary of Contents for CM-32















































































































Search results

Summary of Contents for CM-32

Reviews:

Related manuals for CM-32

Brands by name

Popular brands

Asus CM-32, User Manual

Search results

Summary of Contents for CM-32

Reviews:

Related manuals for CM-32

Brands by name

Popular brands